JJV's Best Boat Scum Remover
Ideal for removing stains including scum and grime on fiberglass and painted aluminum. Common applications include bottoms of boats, camper exteriors, RV’s, decking and more.
Description

JJV’s Best Boat Scum Remover is a revolutionary product that is safe and environmentally friendly. It will remove scum and grime from the bottom of boats safely and effectively. USED ON FIBERGLASS AND PAINTED ALUMINUM BOATS, camper exteriors, RV’s, wood decking, swim platforms, most sidings, cement sidewalks and more.
Without hazardous acids or scrubbing, just spray on and rinse off.
*Note: will NOT remove thick lime deposits. For interior cleaning use our Boat Wash
View the results below you can achieve without scrubbing. Just spray on and rinse off:
BEFORE

AFTER

Note: For Lakes and Rivers that are high in iron you may need multiple applications. The section along the water line may not come off completely.
DIRECTIONS:
Using a CLEAN OR NEW Hudson Sprayer, spray the boat scum remover over the area to be cleaned. DO NOT dilute. Working from bottom to top. Allow the boat scum remover to dwell for a few minutes. Working from top to bottom, use a high pressure sprayer with clean water to remove the film from the hull. Please note that heavily soiled areas may require repeating.
Add 6 oz. to 5 gallon pail of water. Apply using long handle soft brush and pressure wash.
To clean the rest of the boat and interior use our Boat Wash.
Now is a great time to buff and wax with all of the oxidation gone.
KEEP OUT OF REACH OF CHILDREN.
Demonstration
BOAT SCUM REMOVER FAQ’s
How to Clean the Bottom of Fiberglass and Painted Aluminum Boats Using JJV’s Best Boat Scum Remover
DO NOT DILUTE. Use a Hudson sprayer to spray the intended area, working from bottom to top. Allow a few minutes to dwell, keeping area wet with product. Thicker, more dried- on areas may require repeated spraying or a longer dwell period. Next, use your pressure sprayer to rinse the area with clean water.
Note: Does NOT remove heavy lime deposits.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Dirty, Moldy or Stained Carpet Using JJV’s Best Scum Remover
Mix 4 oz. JJV’s Best Boat Scum Remover in a 1 gallon Hudson Sprayer. Fill with water.
Do not soak area. Remove drain plug before rinsing with pressure washer.
For small areas or spot cleaning:
Mix 2 oz. of product in spray bottle. Fill with water. Lightly mist area. Do NOT soak. Agitate area with a clean towel and dab area.
Leaves carpet soft when dry. Not stiff and crunchy!
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Aluminum or Wooden Docks Using JJV’s Best Boat Scum Remover
DO NOT DILUTE. Apply JJV’s Best Scum Remover. Using a Hudson sprayer, spray a good, even coat. Allow to dwell about three minutes without scrubbing. Pressure wash off covering every square inch of the dock. Do not let product dry, before pressure washing.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
JJV’s BEST Boat Scum Remover
* For dealers, 55 gallon drum and 250 gallon totes available.
