FAQ's
How to Clean The Bilges in Boats, Splash Wells, Oil Tanks, Spills and Any Other Grease Issues Using JJV’s Best Bilge Degreaser
Must be diluted 5-1. Test painted surfaces before broad use. Spray the degreaser on the area to be cleaned. Allow dwell time of up to 3 minutes. Rinse with water, wipe or air dry. Please note heavily soiled areas may need repeating. Please be responsible and dispose of contaminated water properly.
Full Strength – For heavily greased areas including oil tanks, wheel bearings, shop spills or stains in cement, agitate with broom or brush. Let dwell up to 3 minutes. Rinse with water. Repeat if necessary.
Keep out of the reach of children. Do not freeze.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Black Streaks, Roller Marks and Mold Using JJV’s Best Streak Master
Works on your boat, camper and RV. Add 6 oz. to 5 gallon pail of water. Apply using long handle soft brush getting Streak Master into all areas. Pressure wash off.
For heavy marks and mold, use full strength, spray it on, agitate and pressure wash off.
Now is a great time to buff and wax with all of the oxidation gone.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean the Bottom of Fiberglass and Painted Aluminum Boats Using JJV’s Best Boat Scum Remover
DO NOT DILUTE. Use a Hudson sprayer to spray the intended area, working from bottom to top. Allow a few minutes to dwell, keeping area wet with product. Thicker, more dried- on areas may require repeated spraying or a longer dwell period. Next, use your pressure sprayer to rinse the area with clean water.
Note: Does NOT remove heavy lime deposits.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Black Streaks and Mold Using JJV’s Best Streak Master
Pour one quart of Streak Master into 5 gallon pail of water. With long handled, soft brush, smear onto the camper/RV. You may need to work the product into the corners & ridges. Next, rinse off with hose or pressure washer.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Dirty, Moldy or Stained Carpet Using JJV’s Best Scum Remover
Mix 4 oz. JJV’s Best Boat Scum Remover in a 1 gallon Hudson Sprayer. Fill with water.
Do not soak area.
For small areas or spot cleaning:
Mix 2 oz. of product in spray bottle. Fill with water. Lightly mist area. Do NOT soak. Agitate area with a clean towel and dab area.
Leaves carpet soft when dry. Not stiff and crunchy!
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Any Boat Exterior, RVs and Campers Using JJV’s Best Boat Wash
You can choose either to add 6 ounces of the Boat Wash to a 5 gallon pail of water and with a long handle soft brush, brush it on, or if it really bad using your hudson type tank sprayer and lightly mist everything. Raise using a power washer. Rinse from the bow to the stern until suds are gone. NOW IS A GREAT TIME TO BUFF AND WAX with all the dirt and oxidation gone.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Any Boat Interior Using JJV’s Best Boat Wash
Add 4 oz. JJV’s Best Boat Wash into a gallon pail, hand wash with a towel, and dry. Another option is adding 2 oz. of cleaner in a 32 oz. bottle. Fill with water. Spray it on, wipe off and dry.
If there are any hard stains or mold, try using JJV’s Streak Master, using rubber gloves during application. Spray on, let it dwell up to 2 minutes, rinse with water.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Aluminum or Wooden Docks Using JJV’s Best Boat Scum Remover
DO NOT DILUTE. Apply JJV’s Best Scum Remover. Using a Hudson sprayer, spray a good, even coat. Allow to dwell about three minutes without scrubbing. Pressure wash off covering every square inch of the dock. Do not let product dry, before pressure washing.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean the Tubes of Pontoons and Bare Aluminum Boats Using JJV’s Best Aluminum Cleaner
Use with a NEW Hudson sprayer. DO NOT MIX WITH OTHER CLEANERS. This will neutralize the cleaner. USE STRAIGHT. Not for painted Aluminum. Spray the bare aluminum from bottom to top, one side a time. Allow to dwell 5-8 minutes making sure you have even foam. Do not allow product to dry. Power wash from the top down. Be sure to rinse well behind the brackets. Wipe dry or allow time to air dry. When drying, if you see white chalking, wipe with wet towel or power wash more. This is the old oxidation. Heavily soiled areas may require repeated spraying. Protect any anodized aluminum.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
How to Clean Zebra Mussels off Using JJV’s Best Zebra Release Agent
Use a NEW Hudson sprayer. DO NOT MIX WITH OTHER CLEANERS. This will neutralize the cleaner. USE STRAIGHT. Spray infested area including all of the small areas they can wedge into. Allow to dwell up to 5 minutes. Do not allow product to dry. Pressure wash or hose off. Rinse well behind and around small areas. Heavily infested areas may require repeating. Be sure to check in and around the outdrive. We do sometimes use an air hose in around the outdrive to blow out loose ones.
Please call us with any questions. It’s likely we’ve encountered your situation at some point and are happy to help you do the best job possible with your cleaning. JJV’s Best has other cleaners and solutions for a variety of cleaning situations.
